How To Re-Hand a GU Multipoint Secury Europa Door Lock
4 June 2015
Ever wondered how to reverse the latch on a multipoint door lock? This guide will show you how to re-hand the GU Secury Europa door lock in just 3 easy steps.
What you will need:
- Screw driver with a Torx T20 head.
Please note this process can be completed while the door lock is in the door so no need to remove the lock.
Step 1: Pull the handle up to throw the locking points out.
This is not essential but makes the job easier to complete.
Step 2: Insert the screw driver into the screw situated in the centre of the latch.
Step 3: Once the screw is undone remove the latch and turn it round to correct handing.
Screw the screw back in and test the lock.
To Re-Hand a GU Multipoint Door Lock use the following instructions:
- Pull the handle up to throw the locking points out.
- Insert the screw driver into the screw situated in the centre of the latch and undo.
- Remove the latch and turn it round to correct handing and then screw the screw back in.
If you have any problems, or need further advice, then please email [email protected].